Skip to content

Class: WastewaterSludge

wastewater/sludge

URI: mixs.vocab:WastewaterSludge

img

Attributes

Own

  • alkalinity OPT
    • Description: Alkalinity, the ability of a solution to neutralize acids to the equivalence point of carbonate or bicarbonate
    • range: String
    • Example: 50 milligram per liter None
  • biochem_oxygen_dem OPT
    • Description: Amount of dissolved oxygen needed by aerobic biological organisms in a body of water to break down organic material present in a given water sample at certain temperature over a specific time period
    • range: String
    • Example: None
  • chem_administration OPT
    • Description: List of chemical compounds administered to the host or site where sampling occurred, and when (e.g. Antibiotics, n fertilizer, air filter); can include multiple compounds. For chemical entities of biological interest ontology (chebi) (v 163), http://purl.bioontology.org/ontology/chebi
    • range: String
    • Example: agar [CHEBI:2509];2018-05-11T20:00Z None
  • chem_oxygen_dem OPT
    • Description: A measure of the capacity of water to consume oxygen during the decomposition of organic matter and the oxidation of inorganic chemicals such as ammonia and nitrite
    • range: String
    • Example: None
  • efficiency_percent OPT
    • Description: Percentage of volatile solids removed from the anaerobic digestor
    • range: String
    • Example: None
  • emulsions OPT
    • Description: Amount or concentration of substances such as paints, adhesives, mayonnaise, hair colorants, emulsified oils, etc.; can include multiple emulsion types
    • range: String
    • Example: None
  • gaseous_substances OPT
    • Description: Amount or concentration of substances such as hydrogen sulfide, carbon dioxide, methane, etc.; can include multiple substances
    • range: String
    • Example: None
  • indust_eff_percent OPT
    • Description: Percentage of industrial effluents received by wastewater treatment plant
    • range: String
    • Example: None
  • inorg_particles OPT
    • Description: Concentration of particles such as sand, grit, metal particles, ceramics, etc.; can include multiple particles
    • range: String
    • Example: None
  • misc_param OPT
    • Description: Any other measurement performed or parameter collected, that is not listed here
    • range: String
    • Example: Bicarbonate ion concentration;2075 micromole per kilogram None
  • nitrate OPT
    • Description: Concentration of nitrate in the sample
    • range: String
    • Example: 65 micromole per liter None
  • org_particles OPT
    • Description: Concentration of particles such as faeces, hairs, food, vomit, paper fibers, plant material, humus, etc.
    • range: String
    • Example: None
  • organism_count OPT
    • Description: Total cell count of any organism (or group of organisms) per gram, volume or area of sample, should include name of organism followed by count. The method that was used for the enumeration (e.g. qPCR, atp, mpn, etc.) Should also be provided. (example: total prokaryotes; 3.5e7 cells per ml; qpcr)
    • range: String
    • Example: total prokaryotes;3.5e7 cells per milliliter;qPCR None
  • oxy_stat_samp OPT
    • Description: Oxygenation status of sample
    • range: String
    • Example: aerobic None
  • perturbation OPT
    • Description: Type of perturbation, e.g. chemical administration, physical disturbance, etc., coupled with perturbation regimen including how many times the perturbation was repeated, how long each perturbation lasted, and the start and end time of the entire perturbation period; can include multiple perturbation types
    • range: String
    • Example: antibiotic addition;R2/2018-05-11T14:30Z/2018-05-11T19:30Z/P1H30M None
  • ph OPT
    • Description: Ph measurement of the sample, or liquid portion of sample, or aqueous phase of the fluid
    • range: String
    • Example: 7.2 None
  • phosphate OPT
    • Description: Concentration of phosphate
    • range: String
    • Example: 0.7 micromole per liter None
  • pre_treatment OPT
    • Description: The process of pre-treatment removes materials that can be easily collected from the raw wastewater
    • range: String
    • Example: None
  • primary_treatment OPT
    • Description: The process to produce both a generally homogeneous liquid capable of being treated biologically and a sludge that can be separately treated or processed
    • range: String
    • Example: None
  • reactor_type OPT
    • Description: Anaerobic digesters can be designed and engineered to operate using a number of different process configurations, as batch or continuous, mesophilic, high solid or low solid, and single stage or multistage
    • range: String
    • Example: None
  • samp_salinity OPT
    • Description: Salinity is the total concentration of all dissolved salts in a liquid or solid (in the form of an extract obtained by centrifugation) sample. While salinity can be measured by a complete chemical analysis, this method is difficult and time consuming. More often, it is instead derived from the conductivity measurement. This is known as practical salinity. These derivations compare the specific conductance of the sample to a salinity standard such as seawater
    • range: String
    • Example: 1 milligram per liter None
  • samp_store_dur OPT
    • Description: Duration for which the sample was stored
    • range: String
    • Example: P1Y6M None
  • samp_store_loc OPT
    • Description: Location at which sample was stored, usually name of a specific freezer/room
    • range: String
    • Example: Freezer no:5 None
  • samp_store_temp OPT
    • Description: Temperature at which sample was stored, e.g. -80 degree Celsius
    • range: String
    • Example: -80 degree Celsius None
  • samp_vol_we_dna_ext OPT
    • Description: Volume (ml), weight (g) of processed sample, or surface area swabbed from sample for DNA extraction
    • range: String
    • Example: 1500 milliliter None
  • secondary_treatment OPT
    • Description: The process for substantially degrading the biological content of the sewage
    • range: String
    • Example: None
  • sewage_type OPT
    • Description: Type of wastewater treatment plant as municipial or industrial
    • range: String
    • Example: None
  • sludge_retent_time OPT
    • Description: The time activated sludge remains in reactor
    • range: String
    • Example: None
  • sodium OPT
    • Description: Sodium concentration in the sample
    • range: String
    • Example: 10.5 milligram per liter None
  • soluble_inorg_mat OPT
    • Description: Concentration of substances such as ammonia, road-salt, sea-salt, cyanide, hydrogen sulfide, thiocyanates, thiosulfates, etc.
    • range: String
    • Example: None
  • soluble_org_mat OPT
    • Description: Concentration of substances such as urea, fruit sugars, soluble proteins, drugs, pharmaceuticals, etc.
    • range: String
    • Example: None
  • suspend_solids OPT
    • Description: Concentration of substances including a wide variety of material, such as silt, decaying plant and animal matter; can include multiple substances
    • range: String
    • Example: None
  • temp OPT
    • Description: Temperature of the sample at the time of sampling
    • range: String
    • Example: 25 degree Celsius None
  • tertiary_treatment OPT
    • Description: The process providing a final treatment stage to raise the effluent quality before it is discharged to the receiving environment
    • range: String
    • Example: None
  • tot_nitro OPT
    • Description: Total nitrogen concentration of water samples, calculated by: total nitrogen = total dissolved nitrogen + particulate nitrogen. Can also be measured without filtering, reported as nitrogen
    • range: String
    • Example: 50 micromole per liter None
  • tot_phosphate OPT
    • Description: Total amount or concentration of phosphate
    • range: String
    • Example: None
  • wastewater_type OPT
    • Description: The origin of wastewater such as human waste, rainfall, storm drains, etc.
    • range: String
    • Example: None